UV Curable Resins scr
Resin Properties List P2
1.General
1 )Grade scr751 scr950 scr9120 scr802
2 )Material type Epoxy Oxycetane Epoxy Epoxy
3 )Equipment model SCS-1000HD SCS-1000HD SCS- 8000,others SCS- 2000,others
4 )Laser He- Cd He- Cd Solid- state Ar/solid- state
5 )Characteristics General use,moisture resistant High sensitivity,high toughness Ultra- high toughness For direct mold
6 )Post- cure Not needed Not needed Not needed Heating
2.Liquid resin properties
1 )Threshold exposure:Ec mJ/cm2 20 5 10.9 9
2 )Penetration depth:Dp µm 139 79 140 152
3 )Viscosity (25°C) Pa·s 0.36 0.59 0.45(30°C) 4.8
4 )Density (25°C) g /cm3 1.13 1.10 1.13 1.59
3.Physical properties of hardened substance (after post- cure for types that require it.)
1 )Tensile strength MPa
80 51 3032 85
2 )Young's modulus MPa 3400 2000 12001500 9200
3 )Elongation at break % 5 8 1525 2
4 )Flexural strength MPa 115 75 4146 120
5 )Flexural modulus MPa 3300 2600 13001500 8900
6 )Izod impact strength J/m     4853  
7 )Hardness (durometer D )   88 85   92
8 )Self- tapping property      
9 )HDT
(heavy load )
*Glass transition temp.
(Measurement method )
  HDT = 56°C
Tg = 108°C
(DMA)
HDT = 64°C
Tg = 121°C
(DMA)
HDT = 5261°C
--
HDT = 250°C
Tg = 133°C
(DMA)
4.Other
1 )Safety       Hazard Non- hazardous substance
Deleterious substance
Deleterious substance
(Class 3,No.4 mineral)
Deleterious substance
(Class 3,No.4 mineral)
Deleterious substance
Non- hazardous substance
Deleterious substance
2 )Remarks        

This information contained herein is given in good faith but without any guarantee or warranty and may involve
proprietary rights of third parties.Our advice given in this information does not release you from the obligation to check
its validity and to test our products as to their suitability for the intended process and uses.The application,use and
processing of our products and the products manufactured by you on the basis of our technical advice are beyond our
control and,therefore,entirely on your own responsibility.Our products are sold in accordance with Product Specification
separately issued by us.

X Close
Copyright(C)2005 D-MEC Ltd. All Rights Reserved.