>> Resin
Properties List P2
| 1.General |
| 1 )Grade |
scr701 |
scr710 |
scr735 |
scr740 |
scr11120 |
| 2 )Material type |
Epoxy |
Epoxy |
Epoxy |
Epoxy |
Epoxy |
| 3 )Equipment model |
SCS- 2000,others |
SCS- 2000,others |
SCS- 8000,others |
SCS- 8000,others |
SCS- 8000,others |
| 4 )Laser |
Ar/solid- state |
Ar/solid- state |
Solid- state |
Solid- state |
Solid- state |
| 5 )Characteristics |
General use,moisture resistant |
High toughness |
High heat resistance,high
toughness |
Ultra- high heat resistance |
Crystal clear |
| 6 )Post- cure |
Not needed |
Not needed |
Not needed /or
heating |
Heating |
Not needed |
| 2.Liquid resin properties |
| 1 )Threshold exposure:Ec |
mJ/cm2 |
33 |
13 |
23 |
16 |
12 |
| 2 )Penetration depth:Dp |
µm |
191 |
135 |
160 |
120 |
160 |
| 3 )Viscosity (25°C) |
Pa·s |
0.34 |
0.5 |
0.47 |
0.43 |
0.26(30°C) |
| 4 )Density (25°C) |
g /cm3 |
1.13 |
1.19 |
1.13 |
1.13 |
1.12 |
| 3.Physical properties of hardened
substance (after post- cure for types that require it.) |
| 1 )Tensile strength |
MPa
|
75 |
66 |
non- postcure |
postcure |
62 |
47 |
| 45 |
67 |
| 2 )Young's modulus |
MPa |
3300 |
2700 |
2510 |
2720 |
3000 |
2650 |
| 3 )Elongation at break |
% |
6 |
10 |
6.8 |
6.0 |
3 |
20 |
| 4 )Flexural strength |
MPa |
104 |
85 |
83 |
97 |
110 |
63 |
| 5 )Flexural modulus |
MPa |
3100 |
2500 |
2530 |
2570 |
2800 |
2040 |
| 6 )Izod impact strength |
J/m |
25 27 |
3238 |
2933 |
3439 |
29 |
30 |
| 7 )Hardness (durometer D ) |
|
87 |
81 |
|
|
|
81 |
| 8 )Self- tapping property |
|
X |
 |
|
 |
|
|
9 )HDT
(heavy load )
*Glass transition temp.
(Measurement method ) |
|
HDT = 53°C
Tg = 82°C
(DMA) |
HDT = 49°C
Tg = 78°C
(DMA) |
HDT = 48°C
Tg = 90°C |
HDT = 85°C
Tg = 110°C |
HDT = 100°C
Tg = 135°C |
HDT = 46°C
Tg = 43°C |
| 4.Other |
| 1 )Safety Hazard |
Non- hazardous substance
Deleterious substance |
Non- hazardous substance
Deleterious substance |
Non- hazardous
substance
Deleterious substance |
Non- hazardous substance
Deleterious substance |
(Class 3,No.4 mineral)
Deleterious substance
HDT = 46 °C
Tg = 43 °C |
| 2 )Remarks |
|
|
|
|
|
|
This information contained herein is given in good faith
but without any guarantee or warranty and may involve
proprietary rights of third parties.Our advice given in this information
does not release you from the obligation to check
its validity and to test our products as to their suitability for the intended
process and uses.The application,use and
processing of our products and the products manufactured by you on the basis
of our technical advice are beyond our
control and,therefore,entirely on your own responsibility.Our products are
sold in accordance with Product Specification
separately issued by us.
